Grandstream Networks GXP2130 User Manual page 4

Hide thumbs Also See for GXP2130:

Placing a Three-Way Conference Call

To initiate a conference call:

Step 1 - During an active call, press the

button. The first call is placed on hold, a second line is

opened i.e. you hear a dial tone.

Step 2 - Dial the second person's telephone number.

Step 3 - When the second person answers, press the

button again. All three are now in the

conference call session. To end the conference, simply hang up.

Call Pickup

The Call Pickup feature allows users to pick up incoming calls within their own pre-designated zone.



To pickup an incoming call within the your own pre-designated zone simply dial *7 and then #

Voice mail

A Red light at the top right hand corner of the set indicates arrival of new voice mail(s). To Access voice

mail:

• Press the line button next to the word VM on the screen. Then press the

button.

• Enter your voice mail pass code (if any).

• To hear new voice mail press 1.

• To hear old voice mail press 2.

• To delete a voice mail press 3.

Transfer to Voice mail

This feature allows you to transfer someone (either a caller or a called person) to leave a voice mail to a

specific extension.

• To transfer to specific extension to leave voice mail: Press

button, then dial *6<ext. number>, and

after that immediately press the

button again.

• To leave a voice mail to a specific extension: Dial *6<ext. number>.