Toshiba Tecra A9 User Manual page 183

Wireless IEEE 802.11 Channels Sets
(Revision B, G and N Draft Ver. 1.0)
Frequency Range
Channel ID
1
2
3
4
5
6
7
8
9
10
11
12
13
*1 Factory-set default channels
*2 Refer to the sheet Approved Countries/Regions for use for the
countries/regions that in which these channels can be used. When
installing Wireless LAN cards, the channel configuration is managed as
follows:
■
■
■
User's Manual
TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150
For wireless clients that operate in a Wireless LAN Infrastructure,
the Wireless LAN card will automatically start operation at the
channel identified by the Wireless LAN Access Point. When
roaming between different access points the station can dynamically
switch to another channel if required.
For Wireless LAN cards installed in wireless clients that operating in
a peer-to-peer mode, the card will use the default channel 10.
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
2400-2483.5 MHz
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457*
1
2462
2467*
2
2472*
2
C-3