Samsung WD95J5 Series User Manual page 55

Problem
1C
AC
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
WD95J5410AW_03666K-00_EN.indd 55
The WaterLevel sensor is not working properly.
• Try power off and restarting the cycle.
• Check WaterLevel Sensor wire harness.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the "1C" code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
Action
English 55
2020/6/8 13:45:41