Samsung WD95J5 Series User Manual page 22

Installation
C
NOTE
• After connecting the water hose to the adaptor, check if it is connected properly by
pulling the water hose downwards.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
22 English
WD95J5410AW_03666K-00_EN.indd 22
C
D
3. Hold the adaptor and turn part (C) in the
arrow direction to loosen it by 5 mm (*).
4. Insert the adaptor onto the water tap,
and then tighten the screws while lifting
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
6. While pulling down part (D) on the
water hose, connect the water hose to
the adaptor. Then, release part (D). The
hose fits into the adaptor with a clicking
sound.
7. To complete connecting the water hose,
see 2 and 3 on the "Connecting to a
threaded water tap" section.
2020/6/8 13:45:34