Table of Contents
Advertisement
Rails
en
Fitting and removing the pull-out rails
On appliance models with shelf supports, you must
change the basic settings to "Telescopic rails: Yes".For
more information, refer to the "Basic settings" section.
If necessary, you can use pull-out rails on all levels.
If your appliance features the EcoClean Direct cleaning
function, you will need to take the entire shelf supports
for fitting and removing the pull-out rails out of the
cooking compartment. Otherwise, the EcoClean Direct
coating may be damaged.
If your appliance features the pyrolytic self-cleaning
function, you will need to take the pull-out rails out of
the cooking compartment before running the cleaning
function.The pull-out rails are not suitable for pyrolytic
self-cleaning.
Notes
Only use the pull-out rails in conjunction with the
■
universal pan, baking tray, wire rack and
accessories that are placed on the wire rack. All
other accessories are unsuitable.
The pull-out rails are not suitable for appliances with
■
a microwave function.
:
Warning – Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Removing the pull-out rails
Push on the tab marked "PUSH" behind the end of
1.
the rail, and push the rail away from you (fig.
Keep the "PUSH" tab pushed back and swing the rail
2.
out (fig.
).
"
18
Pull the rail out towards you until the retainer at the
3.
back unhooks (fig.
Remove the pull-out rail (fig.
4.
Use washing-up liquid and a sponge to clean the pull-
out rails. For stubborn dirt deposits, use a brush.
Fitting the pull-out rails
The rails are designed to fit on either the right- or the
left-hand side (not both).Make sure when you fit them
that you can pull them out towards you.
).
!
The rail must sit between the two bars (fig.
1.
Push the retainer at the back in between the lower
2.
and the upper bar (fig.
).
#
).
$
).
"
).
!
Advertisement
Table of Contents
