Technical Specifications - Crate GT-500H Owner's Manual

GT-500H

TECHNICAL SPECIFICATIONS:

Output Power Rating
Input Impedance
Maximum Signal Accepted
Signal To Noise Ratio
Gain
Tone Control Range
Line Out Level
Tube Type
Power Requirements
Size and Weight
The GT-500H is covered with a durable black Tolex
wipe it clean with a damp lint-free cloth to remove dirt and road film. Never spray cleaning agents
directly onto the cabinet, and stay away from abrasive cleansers which could damage the finish.
©1998 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133
Amplifier
Crate continually develops new products, as well as improves existing ones.
For this reason, the specifications and information in this publication
are subject to change without notice.
50W RMS @ 10% THD, 8 ohm load, 120 VAC
1M ohm
2.8V peak to peak
Channel B: 52dB
Channel A: 58dB
Channel B: 75dB
Channel A: 68dB
Channel B: Bass:
Mid:
Treble:
Channel A: Bass:
Treble:
375mV RMS @ full power output
Preamp: (4) 12AX7 Power Amp: (4) EL84/6BQ5
120VAC, 60Hz, 110VA
100/115VAC, 50/60Hz, 110VA
230VAC, 50/60Hz, 110VA
11"H x 21.25"W x 11.25"D, 35 lbs.
® material. To keep the cabinet in top condition,
12dB, 60Hz
10dB, 600Hz
7dB, 4kHz
20dB, 70Hz
16dB, 2kHz
P/N 47-547-12 • 02/98