Technical Specifications - Crate Professional BV-60H Owner's Manual

®
BV-60H/120H

Technical Specifications:

Output Power Rating
Gain
Tone Control Range
Channel 1
Channel 2
Presence
Input Impedance
Maximum Signal Accepted
Tube Types
Line Out Level
Power Requirements
Size and Weight
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice.
The BV-60H and 120H are covered with high-quality, durable Tolex
abrasive cleansers. Wipe the cabinets clean using a slightly dampened soft cloth. Do not spray cleaners directly
into the amplifier. Never use brass cleaners on the hardware since they could damage their protective coatings.
©1996 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133
All-Tube Professional Series
BV-60H 50 watts RMS @ 5% THD 8 or 16 ohm load, 120 VAC
BV-120H 100 watts RMS @ 5% THD 8 or 16 ohm load, 120 VAC
Channel 1 66dB, tones at "10" @ 1kHz
Channel 2 101dB, tones @ "10" @ 1kHz
Low 16dB @ 100Hz
Mid 20dB @ 300Hz
High 10dB @ 10kHz
Low 15dB @ 100Hz
Mid 13dB @ 500Hz
High 10dB @ 10kHz
1M ohm
2.8V peak to peak
Preamp 12AX7A (3)
Power Amp BV-60H: 12AX7A (1), 6L6GT/5881 (2)
BV-120H: 12AX7A (1), 6L6GT/5881 (4)
1.2V RMS nominal
BV-60H 115V 60Hz, 110VA; 2.5A Slo-Blo Fuse
BV-120H 115V 60Hz, 180VA; 5A Slo-Blo Fuse
12"H x 30.25"W x 10"D, 50lbs.
Guitar Amplifiers
5dB @ 10kHz
® . To keep them looking their best, avoid
®
P/N 47-631-03 • 09/96