Malfunction
"E:30 / -10" and/or
burns.
flashes.
All other error codes.
"E:30/-20"
Cause and Troubleshooting
Turn the device back on.
3.
If the error message appears again, please contact
4.
customer service.
→
"Customer Service", page 52
Detergent dosage is too high.
▶ Immediate measure: mix a tablespoon of fabric softener
with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
Reduce the amount of detergent for the next wash
▶
with an equal load.
Temperature is too high.
Wait for the temperature to drop.
▶
→ "program cancel", Page 32
▶
Water level is too high.
Select a suitable program for draining.
▶
→ "Programs", Page 25
Door is not closed.
Close the door.
1.
To start the program, pressStart/Refill
2.
.
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, pressStart/Refill
4.
.
Malfunction
Please contact customer service.
▶
→
"Customer Service", page 52
Solenoid valve defective.
Please contact customer service.
▶
→
"Customer Service", page 52
Detergent dosage is too high.
Reduce the amount of detergent for the next wash
▶
with an equal load.
Additional water filled.
▶ Do not fill the device with additional water during
operation.
TroubleshootingNL
43