Zanussi ZOP37907 User Manual page 22

Problem
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
It takes too long to cook the
dishes or they cook too quickly.
Steam and condensation settle
on the food and in the cavity of
the oven.
The display shows "C3".
The display shows "F102".
The display shows an error code
that is not in this table.
22
Possible cause
The Child Lock is on.
The fuse is released.
The lamp is defective.
The temperature is too low or too
high.
You left the dish in the oven for
too long.
The cleaning function does not
operate. You did not fully close
the door, or the door lock is de-
fective.
• You did not fully close the
door.
• The door lock is defective.
There is an electrical fault.
Remedy
Refer to "Using the Child Lock".
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
Replace the lamp.
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
Fully close the door.
• Fully close the door.
• Deactivate the oven with the
house fuse or the safety
switch in the fuse box and ac-
tivate it again.
• If the display shows "F102"
again, contact the Customer
Care Department.
• Deactivate the oven with the
house fuse or the safety
switch in the fuse box and ac-
tivate it again.
• If the display shows the error
code again, contact the Cus-
tomer Care Department.
www.zanussi.com