Electrical Connection - Smeg DTR38ID User Manual

Installation
1 2
3 4
A
Hose connection should be made in a safe
manner. Your drain house will be flooded if
the hose comes out of its housing during
water discharge.
C
Water drain hose should be attached to a
height of maximum 80 cm.
C
Make sure that the water drain hose is not
stepped on and it is not folded between the
drain and the machine.
3.4 Adjusting the feet
• In order to ensure that the dryer operates more
silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by
adjusting the feet.
• Turn the feet to left or right until the dryer stands
level and firmly.
C
Never unscrew the adjustable feet from
their housings.

3.5 Electrical connection

For specific instructions for electrical connection
required during installation (see 1.1.1 Electrical
Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the dryer.
If direct water drain connection is made, then remove
the hose connections.
12 / EN
A
We recommend carrying the dryer in
upright position. If it is not possible to carry
the machine in the upright position, we
recommend carrying it by tilting towards
the right side when looked from the front.
3.7 Warnings about sounds
C
It is normal to hear a metallic noise from the
compressor sometimes during operation.
C
Water collected during operation is pumped
to water tank. It is normal to hear pumping
noise during this process.
3.8 Changing the illumination lamp
In case an illumination lamp is used in your laundry
dryer.To change the Bulb/LED used for illumination
of your tumble dryer, call your Authorized Service.
The lamp(s) used in this appliance is not suitable for
household room illumination. The intended purpose of
this lamp is to assist the user to place laundry in the
tumble dryer in a comfortable way. The lamps used
in this appliance have to withstand extreme physical
conditions such as vibrations and temperatures above
50 °C
Dryer / User Manual