Table of Contents
Advertisement
Question:
I have tuned in Digital TV but
I am not receiving any or all of the
channels and/or the channels I receive
are breaking up
I would like to connect an external
amplifier
I have inserted a disc but it is not playing
I have connected the TV to my VCR via
SCART but it is not recording
I have inserted my iPod but the iPod
menu is not being displayed (iPod
Connecting remains on screen)
All manuals and user guides at all-guides.com
Frequently Asked Questions
If you experience any problems with this Television,
Please contact the helpline.
Customer Support/Technical Helpline
Sky Media UK LTD
Telephone: 0871 2000 463
Email: service@skymediauk.co.uk
Solution:
1) Check you are in an area that can
receive Freeview. Visit
www.freeview.co.uk or call
08701 111 270.
2) Check you have a suitable aerial.
Many indoor aerials will say they are
digital ready, but you will not get
a good signal
3) Consider purchasing a signal booster,
it is much cheaper than a digital aerial
and cures 70% of poor signal problems.
4) Failing the above for now use the
analogue TV, until the signal becomes
stronger in your area.
For best performance we recommend using an
outdoor hi-gain digital aerial. If you are receiving
some digital stations first try to connect a signal
booster in between the TV and TV aerial socket
You require a 3.5mm audio cable to phono
(Red & White connections), this can be
connected into the rear of the TV stand and
to the external amplifier
1) Ensure you have inserted put the disc
in facing the correct way forward
2) Ensure the disc is clean and is not
scratched
3) Some copied discs will not play.
4) Check the DVD is a region 2 disc – to change
the region of the DVD player, refer to section
'Changing Regions'.
In addition to connecting via SCART, you
should connect the aerial cable from the
wall socket to VCR and another aerial
cable from the VCR to the TV
1) Remove the iPod from dock, switch off and
then on both the iPod and television in turn.
Then re-insert the iPod into the docking station.
2) Update the firmware on the iPod.
a) Connect your computer to the Internet (if you
have broadband, it's probably already connected).
b) Connect your iPod to your computer.
c) Go to Start | All Programs | iPod | iPod Updater
20xx-xx-xx (it'll have the date Apple released it
in the title).
d) Run iPod Updater.
If you try to update your iPod's firmware and get
an error message, chances are that means you
need to go to apple.com/ipod/download and get
the latest version of the iPod Updater software
38
Advertisement
Table of Contents
