Table of Contents
Advertisement
Appendix B. Network Cable Water-proof Jacket Installation (Optional)
Purpose:
If the camera is installed outdoor, you can adapt the water-proof accessory for the network cable after the camera is secured on
the installation surface.
① ② ③
No.
1
2
3
4
5
6
7
Steps:
Feed the plugless network cable ⑦ through the lock nut ⑥, waterproof rubber gasket ⑤ (rubber gasket
1.
inset ridge must face waterproof endcap), and the water-proof endcap ④ in order.
2.
Crimp an RJ-45 network plug ③onto the end of the cable,
taking care to insert the twisted pairs of wires in correct order.
3.
Place the O-type gasket ② onto the end of the camera's
network interface socket ①.
4.
Insert the network plug ③ into the camera's
socket①.
④
Water-proof Accessory Components
Components
Components
Camera's Network Interface Socket
O-Type Gasket
Network Plug
Waterproof Endcap
Waterproof Rubber Gasket
Lock Nut
Network Cable from Router/Switch
network interface
⑤
⑥ ⑦
Advertisement
Table of Contents
