Table of Contents
Advertisement
The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min
or 10 min.
Note:
The record parameter configurations vary depending on the camera model.
4. Click Edit to edit the record schedule.
5. Choose the day to set the record schedule.
(1) Set all-day record or segment record:
⧫ If you want to configure the all-day recording, please check the All Day
checkbox.
⧫ If you want to record in different time sections, check the Customize
checkbox. Set the Start Time and End Time.
The time of each segment can't be overlapped. Up to 4 segments can
Note:
be configured.
(2) Select a Record Type. The record type can be Continuous, Motion Detection,
Alarm, Motion | Alarm, Motion & Alarm, PIR Alarm, Wireless Alarm,
Emergency Alarm, or Motion | Alarm Input | PIR | Wireless | Emergency.
⧫ Continuous
If you select Continuous, the video will be recorded automatically according
User Manual of Network Camera
Figure 7-7 Record Schedule
133
Advertisement
Table of Contents
