LG WD-15439BDA Owner's Manual page 18

H ow to use washer
Each cycle has preset settings that are selected
automatically. You may also customize the
settings using the cycle setting buttons. Press the
button for that setting until the indicator light
forthe desired value is lit.
The washer automatically adjusts the water level
for the type and size of wash load for best results
and maximum efficiency. It may seem there is no
water inside the drum in some cycles, but this is
normal.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil level, or
option is available with every cycle. See the
Cycle Guide for details.
WASH/RINSE
Selects the wash and rinse
temperature combination for the
selected cycle. Press the
WASH/RINSE button until the indicator
light for the desired setting is lit.
• Your washer features a heating element to
boost the hot water temperature for Extra Hot
settings. This provides improved wash
performance at normal water heater settings.
• Select the water temperature suitable for the
type of load you are washing. Follow the fabric
care label for best results.
• Warm rinses leave the loads drier than cold
rinses. Warm rinses can increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses use less energy.
SOIL LEVEL
Adjusts the selected cycle to allow
more time for heavily soiled clothes
or less time for lightly soiled clothes.
Press the SOIL LEVEL button until
the indicator light for the desired setting is lit.
18
CYCLE SETTING BUTTONS
BEEPER
Adjusts the volume of the end-of-
cycle beeper, or turns it off.
SPIN SPEED
The washer drum spins at up to
1,200 RPM. This reduces drying time
and saves energy. Press the SPIN
SPEED button until the indicator light
for the desired setting is lit. Some
fabrics, such as delicates, require a slower spin
speed.
The Drain & Spin cycle:The Spin Speed button
also activates the Drain & Spin cycle to drain the
tub and spin clothes; for example, if you want to
remove clothes before the cycle has ended.
To activate the DRAIN & SPIN cycle:
❶ Press the ON/OFF button to turn on the
washer.
❷ Press the SPIN SPEED button.
❸ Select the desired spin speed.
NOTE: If NO SPIN is selected, the washer will
drain only.
❹ Press the START/PAUSE button.