Launch BST580D User Manual page 2

LAUNCH
Trademarks
LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. in China and
other countries. All other marks are trademarks or registered trademarks of
their respective holders.
Copyright Information
Copyright © 2021 by LAUNCH TECH CO., LTD. (also called LAUNCH for
short). All rights reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying and recording or otherwise, without the
prior written permission.
Disclaimer of Warranties and Limitation of Liabilities
• All information, illustrations, and specifications in this manual are based on
the latest information available at the time of publication.
• The right is reserved to make changes at any time without notice. We shall
not be liable for any direct, special, incidental, indirect damages or any
economic consequential damages (including the loss of profits) due to the
use of the document.
• To take full advantage of the unit, you should be familiar with the engine.
• LAUNCH shall not be liable for any damages or problems arising from the
use of any options or any consumable products other than those designated
as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH.
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the test equipment,
please read this user's manual first carefully and observe the following safety
precautions at a minimum whenever working on a vehicle:
• Always perform automotive testing in a safe environment.
• Do not attempt to operate or observe the tool while driving a vehicle.
Operating or observing the tool will cause driver distraction and could cause
a fatal accident.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc. away from all moving
or hot engine parts.
• Operate the vehicle in a well-ventilated work area: Exhaust gases are
poisonous.
II
BST580D User's Manual