Table of Contents
Advertisement
FIVR Configuration
P-Core Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode, the
voltage selected will be applied over all operating frequencies. In Adaptive mode,
the voltage is interpolated only in turbo mode.
Extra Turbo Voltage
Specifies the extra turbo voltage applied while the IA Core is operating in turbo
mode.
VF Offset Mode
Selects between Legacy and Selection modes. Need Reset System after enabling
OverClocking Feature to initialize the default value. In Legacy Mode, setting a
global offset for the entire VF curve. In Selection modes, setting a selected VF point.
VF Configuration Scope
Allows all cores VF curve or per-core VF curve configuration.
Core Voltage Offset
Specifies the offset voltage applied to the IA Core domain. This voltage is specified
in millivolts.
Offset Prefix
Sets the offset value as positive or negative.
E-Core L2 Voltage Mode
Selects between adaptive and Override Voltage modes. In Override Mode the
voltage selected will be applied over all operating frequencies. In Adaptive Mode
the voltage is interpolated only in turbo mode. Uses Mailbox 0SR 0x150, cmd 0x10,
0x11.
Extra Turbo Voltage
Specifies the extra turbo voltage applied while Atom L2 is operating in turbo mode.
Uses Mailbox MSR 0x150, cmd 0x10, 0x11. Range 0-2000 mV.
E-Core L2 Voltage Offset
Specifies the Offset Voltage applied to the Atom L2 domain. This voltage is specified
in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV.
Offset Prefix
Sets the offset value as positive or negative.
50
Advertisement
Table of Contents
