Table of Contents
Advertisement
Compensation value: 0.3, 0.7 or 1.0
• The compensation value will change if the EV step is changed. g"EV STEP" (P. 101)
Number of frames: 3
Menu
Setting display
Viewfinder
Number of
EV STEP
frames
Compensation range
• The exposure value for the remaining
frames blinks during shooting.
Start shooting.
• In single-frame shooting, the exposure changes every time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until the selected number of frames are
taken.
• Releasing the shutter button stops flash bracketing shooting. When it stops, 0 blinks in
the viewfinder and 0 is displayed in green on the super control panel.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P mode : Aperture value and shutter speed
A mode : Shutter speed
S mode : Aperture value
M mode : Shutter speed
TIPS
To apply AE bracketing to the exposure value you have compensated:
j Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
MENU [X] [BRACKETING] [AE BKT]
Bracketing
BRACKETING
AE BKT
OFF
AE BKT
3F 0.3EV
WB BKT
3F 0.7EV
FL BKT
3F 1.0EV
ISO BKT
BACK
SET
2
51
EN
Advertisement
Table of Contents
