Table of Contents
Advertisement
Holding the camera
Keep your fingers and the
strap away from the lens,
flash, and the white
balance sensor.
Taking a picture
while viewing the
monitor
1
Press the u (live
view) button to switch
to live view
• The subject is displayed on the
LCD monitor.
P
P
250
250 F5.6
250
F5.6
F5.6
When the camera stops operating
If no operations are performed for approximately 8 seconds while the camera is
on, the monitor backlight turns off to save battery power (when the super control
panel is lit). If no operations are performed for approximately one minute
thereafter, the camera enters the sleep mode (stand-by) and stops operating. The
camera activates again when you touch any button (the shutter button, q button,
etc.). g"BACKLIT LCD (Backlight timer)" (P. 100), "SLEEP" (P. 100)
Horizontal grip
It is possible to use the LCD monitor as a
viewfinder and check the subject's composition,
or shoot while viewing an enlarged display on
the LCD monitor.
g"Using live view" (P. 35)
I-AF
2
Press the shutter button to
take the picture
L N
N
3 8
3 8
• The picture is taken with the focus adjusted.
Vertical grip
Shutter button
u button
17
EN
Advertisement
Table of Contents
