If Your Dell™ Computer Gets Wet - Dell Inspirion 510M Owner's Manual

D7898bk2.book Page 77 Friday, April 29, 2005 9:39 AM
E- M A I L D E L L — Go to support.dell.com and then click E-Mail Dell in the
Communicate list. Send an e-mail message to Dell about your problem; you can
expect to receive an e-mail message from Dell within hours.
C O N T A C T D E L L — If you cannot solve your problem using the Dell Support
website (support.dell.com) or e-mail service, call Dell for technical assistance
(see page 112).
If Your Dell™ Computer Gets Wet
CAUTION:
Perform this procedure only after you are certain that it is safe to do so. If the computer is
connected to an electrical outlet, it is recommended that you turn off AC power at the circuit breaker
before attempting to remove the power cables from the electrical outlet. Use the utmost caution when
removing wet cables from a live power source.
1 Shut down the computer (see page 32), disconnect the AC adapter from the computer, and
then disconnect the AC adapter from the electrical outlet.
2 Turn off any attached external devices, and disconnect them from their power sources and
then from the computer.
3 Ground yourself by touching one of the metal connectors on the back of the computer.
4 Remove the module bay device (see page 41) and any installed PC Cards, and put them in a
safe place to dry.
5 Remove the battery.
6 Wipe off the battery and put it in a safe place to dry.
7 Remove the hard drive (see page 94).
8 Remove the memory module(s) (see page 41).
9 Open the display and place the computer right-side up across two books or similar props to let
air circulate all around it. Let the computer dry for at least 24 hours in a dry area at room
temperature.
NOTICE:
Do not use artificial means, such as a hair dryer or a fan, to speed the drying process.
CAUTION:
To help prevent electrical shock, verify that the computer is thoroughly dry before
continuing with the rest of this procedure.
10 Ground yourself by touching one of the metal connectors on the back of the computer.
11 Replace the memory module(s), the memory module cover, and the screw(s).
12 Replace the hard drive.
13 Replace the module bay device and any PC Cards you removed.
All manuals and user guides at all-guides.com
77
Solving Problems