Tripp Lite B126-1A1-WP Owner's Manual page 23

Extender/Splitter Daisy-Chain with
Remote/Repeater Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6
cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
3) The B126-004 is set to transmit a stereo audio signal by default. Press the Audio
button on the local unit to switch to 7.1-channel surround-sound audio.
16-08-518-933023-EN.indd 23
(B126-004 only)
23
9/8/2016 2:11:25 PM