Table of Contents
Advertisement
Using the monitor wall mounting kit (purchased
separately)
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing
the installation of a wall mount bracket. Before starting to install a monitor wall mounting
kit, please read the precautions carefully.
Precautions:
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material and the standard wall mount bracket (purchased separately)
are stable enough to support the weight of the monitor. Refer to the product
specifications on the website for weight information.
• Turn off the monitor and the power before disconnecting the cables from the LCD
monitor.
1. Remove the monitor stand.
Lay the screen face down on a clean and
well-padded surface. Detach the monitor stand as
instructed in
How to detach the stand and the base
on page
33.
Then pull the monitor stand backward away from the
monitor.
2. Remove the VESA cover.
Remove the VESA cover with an opening pry tool or a
flat-head screwdriver (purchased separately).
3. Remove the screws on the back
cover.
Use a a cross-pointed screwdriver to release the
screws on the back cover.The use of a
magnetic-head screwdriver is recommended to
avoid of losing the screws.
In case you intend to use your monitor on the stand in the
future, please keep the VESA cover, monitor base,
monitor stand, and screws somewhere safe for future
use.
4. Follow the instruction manuals of the wall mount bracket you
purchased to complete the installation.
Use four M4 x 10 mm screws to fix a VESA standard wall mount bracket to the monitor. Make sure that all
screws are tightened and secured properly. Consult a professional technician or BenQ service for wall
mount installation and safety precautions.
34
Advertisement
Table of Contents
