Table of Contents
Advertisement
Solving problems
Other display warnings
Warning
Wi-Fi icon is displayed on the
screen.
Wi-Fi icon with additional
check mark is displayed on
the screen.
There is no visible Wi-Fi icon
on the screen.
The door is open.
The Charcoal filter of every
zone has a lifetime of 12
months. This means that your
filters will expire within X
days. Please exchange all
filters.
The temperature or humidity
of a zone is out of range.
The temperature or humidity
of a zone is out of range.
"X" compartment
temperature too high
The average humidity value
blinks because the humidity
of one or more zones is
below 40%.
58
Cause/Solution
The device is connected to the cloud service.
The device is connected to the cloud service and remote control is
enabled.
Make sure the device is connected to a local wireless network.
Make sure your LAN has access to the Internet.
The device is not connected to the cloud service.
Make sure the device is connected to a local wireless network.
Make sure your LAN has access to the Internet.
The door has been open too long: close the door.
If the warning keeps showing, call the service center to arrange
repairs. The appliance operates in a safe mode until it is corrected.
The appliance automatically maintains the most suitable temperature
for each temperature zone.
Replace the air filter.
The value of humidity in the room is outside the permitted limits.
Ensure that the appliance is located in in a well-ventilated area and
not exposed extremely low or extremely high temperatures.
The temperature in an individual room is outside the permitted limits.
You can find more information regarding possible causes and
potential solutions for this notification in section »Tips & Tricks«
In the event that this occurs for a longer period of time since the last
intervention in the device (change of setting, loading of bottles,
opening of doors,...) it may mean that temperature sensor is out of
order. Contact a service center to correct the error. The appliance
will operate in safe mode until repaired by a service technician.
The appliance will automatically maintain the most suitable
temperature for each temperature zone.
Pop-up will show. It can be removed by pressing X key or Confirm
key.
By pressing the average humidity value on the status screen, you
can see which zone has the blinking humidity value.
Advertisement
Table of Contents
