Table of Contents
Advertisement
Operation
Monitoring humidity
Clock screen
Appliance Display Standby
Appliance Display Standby is a mode that display enters for optimal power consumption. Appliance
cooling system is operating normal.
Appliance Display Standby activation:
•
with a short press on On/Off key
•
automatically, after a certain time of inactivity (standby time). It can be set in SETTINGS MENU.
It can not be activated in case of any errors detected and in case of opened door.
If Appliance Display Standby mode is active, it will end:
•
by opening the door,
•
by a short press on any key,
•
when error indication is displayed on display,
When this mode ends, the appliance goes back to Status display, appliance works in On-mode.
Key lock
When Key lock mode is activated, it is not possible to switch off the appliance or to change any
setting. Appliance cooling system is operating normal. Settings can be changed only from
ConnectLife mobile application. Your preferences on door sensor, light and display actions will be
executed.
Key lock mode activation:
•
with a 3 seconds press on Key lock key
•
manually from mobile application,
•
automatically, after a certain time of inactivity. It can be set in SETTINGS MENU.
28
Humidity cannot be controlled, only monitored.
Top value is for ZONE A and bottom value is
for ZONE B. On the right side is the average
humidity. The information tab (01) gives extra
information about how humidity is related to
wine.
To view Clock screen press on 'X' key from
Status screen.
To never view clock screen go to SETTINGS
MENU>Display>Clock screen>Never.
,
,
Advertisement
Table of Contents
