Table of Contents
Advertisement
14.
If the appliance is placed in a way that does not allow the door to be opened to the 115° angle,
the opening angle can also be restricted to 90°. In this case, use the door restrictors (1 and
2) and install them according to the door opening direction on your appliance. Carefully open
the door to an angle less than 90° and insert the restrictor into the provided opening in the
upper hinge. Repeat the same process for the lower hinge. When inserting the restrictor into
the hinge, you may also use a small hammer.
Installation of the appliance
15.
Prepare the plinth board. The cut-out in
the plinth board for the ventilation grille
must be centred with the appliance. This
is the only way to ensure correct
operation of the appliance.
16.
Install the ventilation grille into the
wooden plinth board.
53
Advertisement
Table of Contents
