Table of Contents
Advertisement
Turn the water tap on.
2.
Open the appliance door.
3.
Switching on the appliance/
selecting a programme
Press the # button till the indicator
lamp lights up, release the button. The
appliance is switched on.
The v Cottons programme, which is
preset at the factory, is then always
displayed.
You can use this programme or select a
different programme.
If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a programme.
Presettings and maximum load are
indicated on the Touch-Display for the
selected programme.
You can use the displayed presettings
or adjust the selected programme
optimally to the items of washing by
changing the ~ "Programme default
settings" on page 32 and/or selecting
~ "Additional programme settings"
on page 33.
Operating the appliance
Placing laundry into the drum
Insert the laundry.
Close the door.
Notes
Unfold and load presorted items
■
of laundry. Mix large and small
items. Washing items of different
size distribute themselves better
during the spin cycle. Individual
items of washing may cause
an unbalanced load.
Observe the maximum specified
■
load. Overfilling adversely affects the
washing/drying result and promotes
creasing. Make sure that no items of
laundry are trapped between the
door and the rubber seal, and close
the door.
en
35
Advertisement
Table of Contents
