Control Panel - LG GM-652R CE Series Owner's Manual

Control Panel

Depending on the model, some of the following functions may not be available.
Control Panel Features
Freezer
Indicates the set temperature of the freezer compartment in Celsius (°C) or Fahrenheit (°F). The
default freezer temperature is 0°F (-18 °C). Press the Freezer button repeatedly to select a new set
temperature from 5 °F to -7 °F (-23 °C to -15 °C).
Refrigerator
Indicates the set temperature of the refrigerator compartment in Celsius (°C) or Fahrenheit (°F). The
default refrigerator temperature is 37 °F (3 °C). Press the Refrigerator button repeatedly to select a
new set temperature from 43 °F to 33 °F (7 °C to 1 °C).
NOTE
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
Ice Plus
This function increases both ice making and freezing capabilities. When you press the Ice Plus
button, the Ice Plus graphic will illuminate in the display and will continue for 24 hours. The function
one more time.
Shabbath
Shabbath mode is the function designated for use of the refrigerator during Shabbath.
Door Alarm
When power is connected to the refrigerator, the door alarm is initially set to ON. When you press
the Door Alarm button, the display will change to OFF and the Door Alarm function will deactivate.
When either the refrigerator or the freezer door is left open for more than 60 seconds, the alarm
tone will sound to let you know that the door is open. When you close the door, the door alarm will
stop.
CAUTION
Display Mode (For Store Use Only)
• The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while
on display in a retail store. When activated, OFF is displayed on the control panel and the display remains
on for 20 seconds.
• To deactivate / activate:
- With either refrigerator door opened, press the Ice Plus button 3 times consecutively while
pressing the Refrigerator button. The control panel beeps and the temperature settings display to
NOTE
button is pressed. Once on, the display remains on for 20 seconds.
OPERATION 23