Table of Contents
Advertisement
Getting to know your appliance
en
Features
(not all models)
Storage compartment
You can remove and adjust the height of the storage
compartment:
Lift up storage compartment and remove.
1.
When re-inserting, insert hooks on back of storage
2.
compartment at same height to make it level.
Note: Insert the storage compartment carefully to
avoid scratching the appliance.
Shelf
You can remove and adjust the shelf:
Lift shelf and remove.
1.
When re-inserting, position hooks on back of shelf at
2.
same height to make it level.
Note: Insert shelf carefully to avoid scratching
appliance.
Container
You can remove the container:
Press container to the rear,
■
Lift the container at the rear and remove.
■
12
You can insert the container:
Pull out telescopic rails all the way
■
Place the container on the telescopic rails and push
■
into the appliance until it engages.
Ice pack
In the event of a power failure or a fault:
The ice pack delays the warming of the stored frozen
■
food.
You can take out the ice pack for temporarily keeping
food cool, e.g. in a cool bag.
Ice maker
Caution!
Damage to the appliance!
Never store bottles or food in the ice cube container,
even for short periods. This can block and damage the
ice maker.
Ice cube production starts as soon as the appliance
has reached the set temperature.
Notes
Discard the first 30-40 ice cubes for hygiene
■
reasons.
Ice cube production stops automatically when the
■
ice cube container is full.
Information about switching ice cube production on and
off
~ "Switching ice cube production on or off"
on page 16
Advertisement
Table of Contents
