Siemens CI36TP02L Instruction Manual page 11

Table of Contents

Advertisement

Overview of the information texts l
The information texts are provided for the most relevant
functions.In the overview l, you will find all the
information texts for the functions. When you switch on
a function, the appliance will display the information text
for this function. If required, you can switch off the
information text for individual functions.The overview l
will still show all the information texts.
In order to switch on all the information texts in the
functions again, reset the appliance to its factory
settings.
Settings menu
Tap
to open the settings.
Ò
Display brightness
Adjust the control panel
and dimming
brightness and switch the
effect
dimming effect on or off. When
the dimming effect is switched
on, the light slowly becomes
brighter when the appliance is
opened, and then slowly darker
when it is closed.
Volume
Set the volume of the touch key
tone and the audible signal.
Ice cubes and
Start or stop ice cube production.
water filter
Stopping ice cube production is
a good idea before cleaning the
freezer compartment, or if you
are going to be absent for a long
time.
If you replace the filter cartridge
with bypass with a water filter,
switch the water filter counter on.
Home Connect
Connect your refrigerator to your
mobile device.
~ "Home Connect" on page 18
Condensation
(only for 3-door appliances)
protection
On 3-door appliances, a heater is
built into the door pillar to prevent
condensation from building up
between the doors. This menu is
used to switch condensation
protection on or off.
~ "Switching on or switching off
condensation protection"
on page 16
Sabbath mode
Opens the menu for setting the
Sabbath mode and displaying
the Sabbath mode in the main
menu.
All non-essential functions are
switched off so you can also use
the appliance on the Sabbath.
~ "Sabbath mode" on page 16
Getting to know your appliance
Self-test and reset Self-test
Start fault analysis on your
appliance.
Factory settings
Reset the appliance back to its
factory settings as received on
delivery.
Demo mode
After switching on the appliance,
this menu item is displayed for
3 minutes. To switch Demo
mode on or off later, switch the
appliance off and on again. The
mode is displayed again for
3 minutes.
Note: Do not store any food in
Demo mode, as the appliance
remains at room temperature.
The cooling function of the
appliance is switched off.You can
use all other functions.
Regional
Language
¿
¿
settings
Change the display language.
Temperature unit
Select the temperature unit °C/
°F.
en
11

Advertisement

Table of Contents
loading

Table of Contents