Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
•
Do not leave the appliance unattended while plugged in.
•
Do not place the appliance on any soft furnishings.
•
Do not use attachments other than those we supply.
•
Do not set the appliance down while still on.
•
Do not twist or kink the cable, or wrap it round the appliance.
•
Do not use the appliance if it is damaged or malfunctions.
•
Check the cord regularly for any sign damage.
•
This appliance is not intended for commercial or salon use.
PARTS
1. Grille
2. Heat selector switch (N, O, P)
3. Speed selector switch (0, F , E)
4. Cool shot
5. Concentrator
INSTRUCTIONS FOR USE
1.
Wash and condition your hair as normal.
2.
Squeeze out excess moisture with a towel and comb through.
•
Hairsprays contain flammable material – do not use while using this product.
3.
Attach the concentrators or diffuser by fitting it to the front of the hairdryer and
twisting clockwise to lock it.
4.
Plug the product into the mains power supply.
5.
Switch your hairdryer on and select the desired speed setting (low F or high E) using
the speed selector switch.
6.
Select the desired heat setting (low N, medium O or high P) using the heat selector
switch.
7.
After use, turn the appliance off and unplug it.
8.
Let the appliance cool down before cleaning or storing away.
Volumised Styling Using the Roost Boost Attachment
1.
Push the root boost slowly into your roots towards the centre of your head whilst
drying.
2.
Allow the hair to push against the root boost and hold the root boost there for up to 10
seconds
3.
Repeat until you have dry, voluminous hair.
4.
If you hold the root boost at an angle to your head it will push the rootshigher and
therefore create the volume you want.
5.
To set your style, press the cool shot button whilst styling then release it to reactivate
the heat.
6.
Let the attachments cool before removing.
4
6. Diffuser
7. Inlet grille
8. Hang up loop
9. Root boost attachment
5 / 86
Advertisement
Table of Contents
