AXIS Q6078-E PTZ Camera
Get started
Verify that no one has tampered with the firmware
To make sure that the device has its original Axis firmware, or to take full control of the device after a security attack:
1. Reset to factory default settings. See Reset to factory default settings on page 62.
After the reset, secure boot guarantees the state of the device.
2. Configure and install the device.
Web interface overview
This video gives you an overview of the device's web interface.
To watch this video, go to the web version of this document.
help.axis.com/?&piaId=68579§ion=web-interface-overview
Axis device web interface
5