Table of Contents
Advertisement
- Slide the fork on top of the crown race (4) and insert the steer tube from the bottom up (5). Tighten the steer tube to 8 Nm with 8mm
Allen ratchet wrench (6).
- Push in slotted sleeve (7), install top cap and bolt. Tighten lighly to preload the bearings (8).
- Lightly tighten the fork clamp (9) (4mm Allen, max torque 2.0 Nm).
4
7
Building a timemachine
5
8
6
9
Advertisement
Table of Contents
