Table of Contents
Advertisement
Determine the right frame size and stem configuration
For frame size and stem configuration, it is important to calculate the SS
All dimensions are in millimeters!
You intend to use:
Your old bars on new TM
Standard TM bars (Profile)
Any other new bars
Once you know your SS
and RS
new
Place the SS and RS values in the chart (Figure 6) onto the horizontal and vertical.
The chart shows the various handlebar center positions you can achieve on TM01.
Check which point comes closest to the position you have calculated.
The color shows the frame size, the number is a reference to the stem configuration. All the stem configuration are listed in the second
chart (Figure 7).
The Profile aero bars specified on the complete bike offer additional pad adjustment, so you will be able to reach your desired position
even if the position you choose to build is some millimeters away from the calculated values.
You can use the tool on our homepage.
Stack and Reach BB to Handlebar Clamp
SS
new
Please calculate:
SS
= SS - BBH
new
RS
= RS
new
SS
= SP - 60 - BBH
new
RS
= SP + 20
new
SS
= SP - SB - BBH
new
RS
= RP + RB
new
:
new
Figure 6
and RS
values that your timemachine will be to.
new
new
Measure SB and RB on your new bars
Measure SP, RP and BBH on your old bike
Positioning
RS
new
Advertisement
Table of Contents
