Building A Timemachine; Recommended Tooling - BMC TMR01 Owner's Manual

Building a timemachine

Building a timemachine
A timemachine frameset or complete bike includes proprietary components such as brakes, fork, headset, stem, seat post ... For each
of those components, you will find part numbers, service and assembly instructions detailed in the next chapters of this manual.

Recommended tooling

Before you start assembling, make sure you are equipped with the following tools:
- Allen keys: 2mm, 2.5mm, 3mm, 4mm, 5mm
- Ratchet wrench with 8mm allen socket
- Flat wrench 9mm, 13mm
- Red Loctite 271
- Grease gun or grease brush
- Wire cutter pliers
- Long reach pliers
- A black marker pen
- Electrical tape
- 1 extra shifting cable
- Heat gun or hair dryer
- Torque wrench with 4, 5 and 8mm allen heads sockets
- Carbon friction paste
- Bike stand with fixation for frame and fork
12 | 13