HP E4419B User Manual page 157

Next
Press this softkey to move to the next error in the error queue.
The displayed error message is individually cleared each time
Next is selected.
Done
Press this softkey to return to the "System/Inputs" menu.
•
Recorder Output
Press this key to access a menu which allows you to select either
Channel A or Channel B recorder output for setup
modification.Refer to "Recorder Outputs", on page 2-65 for further
information.
Output Off On
Press this softkey to switch the rear panel Recorder Output on
or off. The Recorder Output produces a dc voltage that
corresponds to the selected input channel power level in
Watts.
Max Power
Press this softkey to enter the input power level that you want
to represent the 1 V
Recorder Output.
Min Power
Press this softkey to enter the input power level that you want
to represent the 0 V
Recorder Output.
•
Service
Press this softkey to access a menu which allows you to test and
service your power meter.
Self Test
Press this softkey to access the power meter's self test menu.
Instrument Self Test
Press this softkey to run a series of tests on the power meter.
Refer to "Instrument Self Test", on page 2-75 for further
information on the tests run.
Confidence Check
Press this softkey to verify that the power meter makes an
accurate measurement of it's 1 mW POWER REF output.
HP E4419B User's Guide
Get other manuals https://www.bkmanuals.com
Front Panel Menu Reference "System/Inputs" Menu
maximum output voltage of the
dc
minimum output voltage of the
dc
Menu Reference
3-29