Toro TCM-212 User Manual page 5

Residental and commerical irrigation system controller
Table of Contents

Advertisement

373-0402 TMC-212 UG-E:373-0319 TCM 212 Doc2 8/5/08 10:06 AM Page 3
Controller Components
The following are brief descriptions of the controller
components and display elements. Each of these items
will be explained in further detail within the appropriate
programming, operating and installation sections of this
guide.
1 - LCD Display
A - "Start Time" symbol is displayed when setting the
program start times.
B - "Well Recovery" symbol is displayed when well
recovery time delay is in use.
C - Program start time identification numbers 1–4.
D - Main display of various time values and prompts.
E - Program A, B and C identifiers.
F - "Watering On" symbol is displayed when a water-
ing station is running. Symbol blinks when watering
is paused.
G - "Watering Off" symbol is displayed when Rain
Delay feature is active.
H - "Percent" symbol is displayed when the Season
Adjust feature is in use.
I - Watering Station identification numbers.
J - Day of the week identifiers.
K - "Run Time" symbol is displayed when setting the
watering station run times.
All manuals and user guides at all-guides.com
2 - Control Buttons
3 - Control Dial – Selects all controller programming
+/
button – Increases the time display, scrolls
ON
forward through the program information and selects
watering days.
button – Decreases the time display, scrolls
–/
OFF
backward through the program information and
removes watering days.
button – Advances to the next portion of program
NEXT
information. Resumes watering if paused. Advances
through stations manually when watering.
button – Selects and starts manual
M NU L ST RT
watering operations.
and operation controls (except Manual Start).
Control Dial Positions
– The normal dial position for all automatic
RUN
and manual operations.
– Enables the clock time and
/
CURRENT TIME
D Y
day to be set.
– Enables the watering day
W TERING D YS
schedules to be set and reviewed.
– Enables the program start times
ST RT TIMES
to be set and reviewed.
– Enables the station run time to be
ST TION TIMES
set and reviewed.
(
)
COnTInUED
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents