<Steam Model>
1. Sump Assembly
Connector
Roller
※
a T
e k
a c
e r
n
t o
o t
d
removing the hose or the ball bearings may
be lost.
s i
o l
d
g
e
h t
e
a c
p
w
h
e l i
For Authorized Service Technicians
1) Removing Steam ball valve
① Remove 2 screws.
② Remove the Clamp.
③ Pull the Steam ball valve.
2) Removing Steam Nozzle Hose
① Remove the Top Plate → Lower Cover →
Side Cabinet.
② Remove the Front Cover.
③
Remove the Clamp of Steam Nozzle and Hose
④
Remove the Lower Frame. (3 screws)
⑤
Remove the Cap and Nut of Softener.
⑥ Remove the Lower Nozzle (2 screws) and
Sump Cover (7 screws).
⑦
Remove the Main control board from the Base.
⑧ Remove the 2 screws on back of Base.
⑨
Remove the Roller and Connector.
(Right and Left)
Remove the Hinge supporter from Base hook.
(Right and Left)
⑩
Pull the side of the Tub to remove it.
⑪ Remove the Clamp and Hose from the Sump.
※
M
a
e k
u s
e r
h t
e
not get caught between the tub and the
harness clamp during reassembly.
Make sure the steam nozzle hose is not folded.
- 27 -
t s
a e
m
n
o
z z
e l
h
o
e s
d
o
s e