Zenith A27A23W Operating Manual page 31

O, ,T,ON I R MOT ,U.C,,O.S IPAOE 31
Xf Programming the Remotedid not find your
code, try this procedure to automaticaLLy f ind
the codefor your device. If your remote
becomesinoperable,go backto "Programming
your Remote Wand enter the Zenith TV codefor
step five.
Turn on the deviceyou're
programming for the
remote controL
L
Pressand hotdthe PRGkey until
the indicator Lightturns on.
Pressthe keyfor the device you're
trying to program(CABLE, V CR,
AUX, TV).
Enterthe code 0-0-0 (zero-zero-
zero), then pressthe ENTER key
right away.
Aim the remote at the correct
device and press the POWER
button. Arrow a secondto pass,
then pushthe POWER button
again. Reoeat untit the device
turns off. (This is a triaL and error
process,soit may be necessary to
repeat these stepsuntil the
remote finds your code.)
PushENTER to save the code.
_L
IF
PressPOWER to turn the device
backon.
Youcan qulck_ get out of Auto
Find by pressingthe Quit button.
Zf theinrh'cator U ghtstays on
wtdle youpushPower, instead
ofturning off, all thecodes hove
been triedandyour device can't
beprogrammed.
Usethe
remote
controL to
searchall
possible
codes.
J
3373-0