Zenith A27A23W Operating Manual page 28

P,G 2811 O PER,,,o. I ,OTE F UNCT.O.S
/"Program your
remote to
workwith a
The deviceyou want to program
shouldbe ON.
On the chart in this manual,find
the type of deviceyou'reprogram-
ming and then find the brand
name. Make a note of the three-
digit code--you'Llneed it soon.
Pressand hold the PRGkey. It's
recessedso it doesn't get pushed
accidentally.When the indicator
Eght turns on, you can release
the button.
Pushthe button with the name of
the device you'reprogramming
(VCR,CABLE, A UX, TV).
Usingthe numberpad, enter the
three digit code found on the
chart in the Referencesection.
PressENTER to save the codeThe
indicator light will flash three
times and turn off if the code was
accepted..
Aim the remote at the device and
pushthe POWER button. It should
turn off. If not, try the other
codes |isted and continuefrom
step three.
[_ Programming your Zen_ remote
will ollowyou to use oneremote
to workup to 7 di_erent devices!
Not oil deviceswill work withyour
Zen_ remoteoontroL
3373-0