Table of Contents
Advertisement
The core temperature is highlighted white in the display,
with the current temperature on the left-hand side and
the set temperature on the right-hand side, e.g. "@
15|80 °C". The heating line also refers to the core
temperature.
Once the food reaches the core temperature, an
audible signal sounds. The appliance stops heating. On
the display, the current core temperature is equal to the
set temperature, e.g. "@ 80|80 °C". The time is paused.
Switch off the appliance using the ÿ On/Off button and
remove the meat thermometer from the socket.
:
Warning – Risk of burns!
The cooking compartment, accessories and meat
thermometer become very hot. Always use oven gloves
to remove hot accessories and the meat thermometer
from the cooking compartment.
Changing
After starting the appliance, the core temperature is
highlighted. When you move the rotary selector, the
core temperature is changed and applied immediately.
If you want to change the cooking compartment
temperature, touch the "Temperature" text field
beforehand.
To change the type of heating, interrupt the operation
beforehand using the l Start/Stop button.
When you change the type of heating, the other
Note:
settings are also reset.
Cancel
If you want to cancel the operation, remove the meat
thermometer from the socket and the meat. You can
continue the operation without a meat thermometer
using the l Start/Stop button.
Core temperatures of different foods
Do not use frozen food. The figures in the table are
given as a guide. They depend on the quality and
composition of the food.
You can find comprehensive information on the heating
mode and temperature at the end of the instruction
manual. ~ "Tested for you in our cooking studio"
on page 41
Food
Poultry
Pork
Beef, rare
Beef, medium
Beef, well done
Lamb
Other: Heating/reheating food
Core temperature in
°C
75
75
50
60
70
70
65-75
AChildproof lock
Your appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
The control panel is locked and no settings can be
made. The appliance can only be switched off using the
ÿ On/Off button.
Activating and deactivating
You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the D field for approx. 4 seconds.
A confirmation note appears on the display.
The D field lights up red when the appliance is
switched on. The D field does not light up when the
appliance is switched off.
Childproof lock
en
27
Advertisement
Table of Contents
