Advertisement
English Version
L90 Lifebuoy Light
Installation and Maintenance Instructions
Description
The L90 lifebuoy light is a dry cell powered light equipped with a tilt switch for automatic function. It burns
for two hours with a light intensity of at least 2 candelas and is safe on oil or petrol covered waters.
Advertisement
Table of Contents
Related Manuals for Daniamant L90
Summary of Contents for Daniamant L90
- Page 1 Description The L90 lifebuoy light is a dry cell powered light equipped with a tilt switch for automatic function. It burns for two hours with a light intensity of at least 2 candelas and is safe on oil or petrol covered waters.
- Page 2 Instructions for use Initial fitting To avoid battery drain in transit, the lamp of the L90 is not fully fitted. When the L90 is initially fitted to the vessel, ensure that the lamp is fitted as per the following instructions The above instructions are also printed on the body of the lifebuoy light Install lifebuoy light into bracket with the light in an inverted position.
- Page 3 — L90 Dome Part Number 63-4001 — L90 Sealing Ring Part Number 63-8005 Whenever the L90 lamp or the L90 Dome is replaced, the L90 Sealing Ring must be replaced at the same time. All spares are held at key distributors around the world.
- Page 4 To ensure compliance with the WEEE and Battery Regulations, the Survivor Lo- cation Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
Need help?
Do you have a question about the L90 and is the answer not in the manual?
Questions and answers