Advertisement
Available top colors
Description
The Dan WL3 is a flashing lifejacket light which is activated by a water sensor or
manually using the on/off button that can be operated both above and under
water.
The light is designed to be fitted by the lifejacket owner.
Daniamant A/S
Industrivej 24C
DK-3550, Slangerup, Denmark
Tel: +45 47 37 38 00 Fax: +45 47 37 38 09
Email: orders@daniamant.com
www.daniamant.com
WL3 Instructions – Issue 9 (D0000)
www.daniamant.com
Dan WL3 lifejacket light
Installation and Maintenance Instructions
Advertisement
Table of Contents
Related Manuals for Daniamant Dan WL3
Summary of Contents for Daniamant Dan WL3
- Page 1 Installation and Maintenance Instructions Available top colors Description The Dan WL3 is a flashing lifejacket light which is activated by a water sensor or manually using the on/off button that can be operated both above and under water. The light is designed to be fitted by the lifejacket owner.
- Page 2 Operation The DAN WL3 is switched on automatically when the sensor is immersed in water and can be switched off and back on by pressing the on/off button. The light can also be activated and deactivated manually under dry conditions by pressing the...
- Page 3 It is recommended that the light is activated for 1 minute. Replacement The Dan WL3 lifejacket lights have a storage life of 5 years and must be replaced by the date shown on the label. Health and safety information Dan WL3 lights contain Lithium cells.
- Page 4 To ensure compliance with the WEEE and Battery Regulations, the Survivor Location Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
Need help?
Do you have a question about the Dan WL3 and is the answer not in the manual?
Questions and answers