Table of Contents
Advertisement
Quick Links
Description
The Dan WR3 is a flashing lifejacket light which is activated by a water sensor or
manually using the on/off button.
The recessed holding clips require special tool for assembly and are designed to
be fitted by the life jacket manufacturer.
Daniamant A/S
Industrivej 24C
DK-3550, Slangerup, Denmark
Tel: +45 47 37 38 00 Fax: +45 47 37 38 09
Email: orders@daniamant.com
www.daniamant.com
www.daniamant.com
WR3 Instruction Issue 08 (D0613)
Dan WR3 lifejacket light
Installation and Maintenance Instructions
Advertisement
Table of Contents
Related Manuals for Daniamant Dan WR3
Summary of Contents for Daniamant Dan WR3
- Page 1 Dan WR3 lifejacket light Installation and Maintenance Instructions Description The Dan WR3 is a flashing lifejacket light which is activated by a water sensor or manually using the on/off button. The recessed holding clips require special tool for assembly and are designed to be fitted by the life jacket manufacturer.
- Page 2 Installation The Dan WR3 is for use on solid foam, easy to don lifejackets only. The recessed Clip may be fitted only by the lifejacket manufacturer, as specialised cutting tools are required; the light may be changed by anybody. New Clip (new jackets), part no.1953 for standard blue clip for other colours contact orders@daniamant.com.
- Page 3 It is recommended that the light is activated for 1 minute. Replacement The Dan WR3 lifejacket lights have a storage life of 5 years and must be replaced by the date shown on the label. Health and safety information Dan WR3 lights contain Lithium cells.
- Page 4 To ensure compliance with the WEEE and Battery Regulations, the Survivor Location Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
Need help?
Do you have a question about the Dan WR3 and is the answer not in the manual?
Questions and answers