Related Manuals for Daniamant Dan W3-1
Summary of Contents for Daniamant Dan W3-1
- Page 1 Dan W3-1 lifejacket light Installation and Maintenance Instructions Description The Dan W3-1 is a flashing lifejacket light which is activated by a water sensor attached to the cable or manually using the on/off button. www.daniamant.com...
- Page 2 The Dan W3-1 is for use on all types of lifejackets. The Dan W3-1 is supplied with a fixing clip. The clip is intended to be placed behind a strip of lifejacket material or reflective tape; the light is secured by pressing it into the clip.
- Page 3 It is recommended that the light is activated for 1 minute. Replacement The Dan W3-1 lifejacket lights have a storage life of 5 years and must be replaced by the date shown on the label. Health and safety information Dan W3-1 lights contain Lithium cells.
- Page 4 To ensure compliance with the WEEE and Battery Regulations, the Survivor Location Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
-
Page 5: Installation And Maintenance Instructions
Dan W3-2 lifejacket light Installation and Maintenance Instructions Description The Dan W3-2 is a flashing lifejacket light which is activated by a water sensor or manually using the on/off button. The light is designed to be fitted by the lifejacket manufacturer only. www.daniamant.com... - Page 6 Installation The Dan W3-2 is for use on all types of lifejackets. The Dan W3-2 is supplied with a fixing clip. The clip is intended to be placed behind a strip of lifejacket material or reflective tape; the light is secured by pressing it into the clip.
- Page 7 Maintenance Routine service Dan W3-2 is maintenance free, but the following checks must be made annually: 1. Inspect the light for signs of damage or corrosion. 2. Press the on/off button *for one second and the light will commence flashing, then press the button once more* and the light should deactivate.
- Page 8 To ensure compliance with the WEEE and Battery Regulations, the Survivor Location Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
- Page 9 Dan W3 lifejacket light Installation and Maintenance Instructions Description The Dan W3 is a flashing lifejacket light which is activated by a water sensor or manually using the test-on/off button. www.daniamant.com...
- Page 10 Installation The Dan W3 is for use on all types of lifejackets. The Dan W3 is supplied with a fixing clip. The clip is intended to be placed behind a strip of lifejacket material or reflective tape; the light is secured by pressing it into the clip.
- Page 11 Maintenance Routine service Dan W3 is maintenance free, but the following checks must be made annually: 1. Inspect the light for signs of damage or corrosion. 2. Press and hold for one *second the test-on/off button and the light will commence flashing, and then press the Test- button once more and the light should deactivate.
- Page 12 To ensure compliance with the WEEE and Battery Regulations, the Survivor Location Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
Need help?
Do you have a question about the Dan W3-1 and is the answer not in the manual?
Questions and answers