Advertisement
PARTS
IDENTIFICATION
OPERATION
AND
FUNCTION
OF
CONTROL:
(TURNTABLE SECTION)
AC LINE VOLTAGE (Fig. 2)
CAUTION
If your local voltage is different, please turn the AC line voltage selector
to your local voltage
@ROTOR
(See Fig.1-@)
This unit uses a direct drive motor. Therefore, the rotor, which is the
@STROBO ILLUMINATOR (See Fig.1-@)
@SPEED ADJUSTMENT SCREWS (See Fig.1- © )
If, for any reason, the adjustment cannot be successfully made, use a
(A) tip screwdriver to adjust the appropriate speed adjustment screw
(33 of 45) located beneath the turntable platter.
Turning the speed adjustment screws to the right or left will increase
or decrease the speed respectively.
@STROBO
MARKS
(See Fig.1- @ )
@STROBO LABEL (See Fig.1- @ )
Advertisement
