How To Use - Panasonic ES-LV6Q Operating Instructions Manual

3
Disconnect the adaptor after charging is completed�
Note
You cannot operate the shaver while charging.
While charging
glows.
The number of the battery
capacity lamp will increase as
charging progresses.
Notes
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp (
minutes. It will eventually glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the charge status
lamp ( ) will blink quickly and the battery may fail to charge
properly in extremely high or low temperatures.
• The shaver can be used for approximately 2 weeks with a full charge.
(Based on one 3‑minute dry‑shave usages per day in an ambient
temperature range of 20 °C – 30 °C.)
The number of usable days varies depending on the following
conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑ Usage frequency of the sonic vibration cleaning mode
• If there is noise from the radio or other sources while using or charging
the appliance, move to a different location to use the appliance.
ES-LV6Q_CIS.indb 9
After charging is completed
All the battery capacity lamp
and will glow and then turn
off after 5 seconds.
) may not glow for a few

How to use

This appliance has a smart lock function, so the power switch is
automatically locked to prevent accidental operation when not shaving.
► Unlocking the power switch
The lamps illuminate upwards
and the power switch is
automatically unlocked when
the main body is grasped.
• The remaining battery capacity
will be shown and then turn off
after approximately 1 second.
► Locking the power switch
The lamps illuminate downwards
and the power switch is
automatically locked 1 minute
after releasing the main body.
• The switch lock lamp ( ) will
light up for 5 seconds and turn off.
• The sensor may respond and the power switch may be unlocked
when an electrical device or metal object is brought closer. This
is not abnormal.
Shaving beard
1
Press and shave�
• The "shaving sensor", which automatically
adjusts the power depending on the beard
thickness, will operate.
It will shave with high power on areas where
the beard is heavy, and reduce the power on
areas where the beard is thin, to reduce
burden on the skin.
9
2017/08/17 9:43:10