Panasonic ES-LV6Q Operating Instructions Manual page 10

Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver over
the face against the grain of the beard.
• The beard under the chin and around the
throat can be shaved better by stretching
the skin so the beard will stand.
• To prevent damaging the system outer
foil, do not shave with only a part of the
system outer foil.
2
Press when finished.
While using
The used time and remaining
battery capacity are shown and
then turn off after 7 seconds.
• The shown time returns to
[0'00"] after 10 minutes.
• The shaving sensor lamp
( ) blinks.
10
ES-LV6Q_CIS.indb 10
After use
The used time and remaining
battery capacity blink
alternately and then turn off
after 8 seconds.
When the battery capacity is low
"10%" appears and " " blinks.
The appliance beeps twice after switched off.
• You can shave 1 to 2 times after "10%"
appears. (This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient temperature lower
than approximately 5 °C.
• The shaving sensor may not respond depending on the type and
quantity of the shaving gel. This is not abnormal.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
• To prevent erroneous operation, place your fingers on the finger
rest while using the shaver.
• The sonic vibration cleaning mode is activated when the power
switch is pressed for more than 2 seconds while the shaver is
not operating. (See page 11.)
You cannot shave in this mode.
►Switching the shaver head
You can change the pivot action.
FREE
The shaver head is moved to prevent
missed spots.
LOCK
You can lock the shaver head.
FREE
LOCK
2017/08/17 9:43:10