Toshiba Satellite M40X-119 User Manual page 37

Hard Disk Drive
Automatic Power Off
System Automatic
Standby/Hibernation
Keypad Overlay
Power-on Password
Battery Save Mode
Instant Security
Panel Power Off/On
Low Battery
Automatic
Hibernation
Hibernation
User's Manual
This feature automatically cuts off power to the
hard disk drive when it is not accessed for a time
specified. Power is restored when the hard disk
is accessed. You can specify the time in the
TOSHIBA Power Saver.
This feature automatically brings the system to
standby mode or Hibernation mode when there is
no input or hardware access for a time specified.
You can specify the time and select either
System Standby Mode or System Hibernate in
the TOSHIBA Power Saver.
A ten-key pad is integrated into the keyboard.
Refer to the Keypad overlay section in Chapter 5,
The Keyboard, for instructions on using the
keypad overlay.
Two levels of password security are available:
supervisor and user. This feature prevents
unauthorized access to your computer.
This feature lets you save battery power.
You can specify the Battery Save Mode in the
TOSHIBA Power Saver.
A hotkey function blanks the screen providing
quick and easy data security.
This feature turns power to the computer off
when the display panel is closed and turns it back
on when the panel is opened. You can specify
the setting in the TOSHIBA Power Saver.
When battery power is exhausted to the point
that computer operation cannot be continued,
the system automatically enters Hibernation and
shuts down. You can specify the setting in the
TOSHIBA Power Saver.
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk. When you
turn on the power again, you can continue
working right where you left off. Refer to the
Turning off the power section in Chapter 3,
Getting Started, for details.
Introduction
1-11