Diagnostic Counter Reset - AB Quality Allen-Bradley DH-485 User Manual

Diagnostic Counter Reset

Table B.C
Diagnostic Status Reply for KF3
Byte Description
1 Mode/Status byte
2 Interface/Processor Type
Bits 0 3: Interface type
(E = Extended)
Bits 4 7: Processor type
(F = Computer)
3 Extended Interface Type
4 Not Used
5 Series/Revision
Bits 0 4:
Bits 5 7:
6 16 Bulletin Name = (ASCII)
17 24 Product specific Information
This command resets the diagnostic counters in the node interface module.
Figure B.7
Diagnostic Counter Reset Command Format
1 byte 1 byte
CMD STS
06
Figure B.8
Diagnostic Counter Reset Reply Format
1 byte 1 byte
CMD STS
46
Appendix B
Diagnostic Command Support
Status Reply (hex)
00 (No Modes)
FE
2C
0 = Revision A
1 = Revision B, etc.
0 = Series A
1 = Series B, etc.
1770 KF3"
0
2 bytes 1 byte
TNS FNC
07
2 bytes
TNS
B 5