Table of Contents
Advertisement
Advanced Communication
Parameters
The advanced communication parameters are located in the Submenu.
When parameter 9, the Submenu entry parameter, is shown on the left
display, the Data display on the right will show dashes. Press the Data
button to enter the Submenu and display the submenu parameter numbers.
The number on the left will change from 9 to 0, and its decimal point will
light up, remaining lit as long as you are in the Submenu.
Figure 3.3
Submenu Indicator
Communication
Parameter
Submenu
Indicator
Important: Changing the default setting of these parameters can disrupt
operation of the network.
Once in the submenu, you change parameters and select parameters in
the same manner as in the main menu, using the View and Data buttons.
When the last submenu parameter is reached, press View to go back to the
first submenu parameter.
Press the Exit button alone to return to the main menu without saving
submenu changes. Press Exit and View simultaneously to save all changes
in both menus and return the module to run mode.
Table 3.C describes each advanced (submenu) communication parameter
and its valid settings. The numbers in parentheses are the factory default
values as they appear in the display.
Chapter 3
Configuring the KF3
Current Setting
3 7
Advertisement
Table of Contents
