Table of Contents
Advertisement
Available languages
Available languages
GB
Before first use
Cleaning the
sensor display
Clean the sensor
with a soft cloth
before first use.
Functional test
and automatic
sensor adjustment
After connecting the
fitting to the power
supply, a functional test is initiated. It is normal that
the open and close noise of the water converter is
heard. The optimum zone for the sensor range is
adjusted during the functional test. Please make sure
that there are no foreign objects in front of the sensor,
otherwise the sensor zone will be automatically
reduced. The self-adjustment phase may take up to
3 minutes.
Method of functioning
Opening and
closing the water
supply
When the hands
reach the sensor
zone, the water is
automatically
switched on within
approx. 0.5–1 sec-
onds. The water
stops running
approx. 0.5–1 seconds after the hands have left the
sensor zone.
The water supply
closes automatically
if the hand-washing
time exceeds 1 min-
ute during which the
sensor detects an
object. Once the
hands or the object
are removed, the
water jet will resume
after approximately
10 seconds.
Warning
• Symbols affixed to your product may not be
removed or covered. Information on the product
that is no longer legible must be replaced immedi-
ately.
Before putting the unit into operation, read
and observe the operating instructions.
14
Do not use acid-based
cleaning agents.
Foreign objects and
contamination influence
the correct functioning of
the sensor. Please ensure
adequate cleaning.
Daily use
Battery maintenance
If the light on the tap
flashes every 4 seconds, then
the batteries are empty.
Replacement is necessary.
The tap will not work during this
period.
Cleaning the mixing nozzle
Do not forget to unscrew
the mixing nozzle to
remove any lime resi-
dues or foreign objects.
In case of intensive con-
tamination it is recom-
mended to replace the
mixing nozzle with a new
one.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
4 Sec.
Advertisement
Table of Contents
